Mitel Inter-Tel Axxess, Руководство администратора

Страница: 137 / 384

Page 121 Station Feature Codes
System Features
Inter-Tel
®
Axxess
®
Administrator Guide — Issue 11.0, May 2008
Hold – System 335 Places an outside call on system hold. It can be picked up directly
at any endpoint that has an individual trunk button and has
allowed-answer and/or outgoing access for that trunk, or by the
station that placed it on hold. (If used on conference or intercom
calls, the system places the call on individual hold.)
Hunt Group Remove
Hunt Group Replace
Hunt Group Remove/Replace 322
323
324 Removes the station from its assigned hunt group(s) or places it in
again. Does not affect non-hunt group calls. The remove/replace
feature code can be used to toggle the feature.
LCD Contrast Adjustment 303 (Model 8662, 8622, 8620, 8660, 8560 endpoints only) Adjusts the
LCD contrast on the display. The endpoint must be idle to use this
feature.
Message 365 This feature code is used for leaving and retrieving a message
waiting indication at a called station or the called station’s message
center. Depending on how the message was left, the called station
user either retrieves the message from his/her message center or
from the station that left the message. (Inter-Tel endpoints use the
MSG button.)
Message – Cancel 366 Allows the station user to cancel a message waiting indication that
he or she left at another station.
Message – Cancel Current 368 Cancels a message waiting indication that is waiting at the station
without requiring the user to respond to it. (Inter-Tel endpoints can
use the asterisk [*] button while viewing the message.)
Message – Silent 367 Leaves a message waiting indication at a station without first plac-
ing an intercom call. (This is the code that should be used by ana-
log Voice Mail units connected to the system.)
Mute On/Off 314 (Inter-Tel endpoints only) Turns the microphone on or off during a
call. If muted, the endpoint user can hear the other party, but the
party cannot hear the endpoint user. (Inter-Tel endpoints can also
use the MUTE button.)
Page 7 When followed by a paging zone code (0-9 or 0-49), it allows
announcements to be made through endpoint speakers and any
external paging speakers in the page zone. (Analog endpoints
have a default PAGE button.)
Page On/Off 325 (Inter-Tel endpoints only) Halts pages through the endpoint
speaker or allows them to be received again.
Program Bit Rate 393 (Model 8560, Executive Display, Professional Display, Model 8520,
Standard Display, and Associate Display endpoints only)
This
allows a user to change the bit per second (bps) rate of an
attached PCDPM’s serial port.
Program Keys 397 (Inter-Tel endpoints only) User-programmable feature buttons and
station speed-dial buttons can be programmed using this feature
code.
Table 17. Station Feature Codes (Continued)
FEATURE NAME (CONTINUED) CODE DEFINITION (CONTINUED)