© Copyright
MINOS DIS TICARET LIMITED SIRKETI., 2020. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI.
Document No: T-MDR.2020_I.O.M./ Date: 09.01.2020
4.3.2- Rear roller adjustment:
The power harrow is equipped, on both sides, with an adjustment plate
(see
fig. 13 A)
with holes and two removable pins
(see fig. 13 B)
.
Operator can adjust the rear roller height in
four different positions
, by
inserting the pins
(B)
into the holes and immediately above and below the
roller's swinging arms, according to the desired working height.
Do NOT forget the use safety split pins!
Figure 13- Working depth adjustment
The maximum roller height from the ground can be adjusted by inserting the
pins into the upper holes. The maximum roller height provides a maximum
working depth.
The minimum roller height from the ground can be adjusted by inserting the
pins into the bottom holes. The minimum roller height provides a minimum
working depth.
Always make sure to position the roller at the same height on both
sides of the machine, by checking that the pins are inserted in the
corresponding hole positions of the side plates!
35