Mindray HyBase 8300, Руководство оператора

Страница: 58 / 176

Daily Operations
2-30
2.3.5 IR Remote Control with LCD (optional)
2.3.5.1 Coding
The IR remote control with LCD can control the operating table only after the match code
operation is executed. See the procedure below for details:
1. Press and hold both of the up key “ ” + the down key “ ” for 5 seconds.
2. In 15 seconds, press and hold the button on the override panel, until the override
panel beeps (2 tones).
2.3.5.2 Code Label
The operating table and the associated IR remote control are
marked by adhesive code labels:
1. The adhesive code labels are affixed to the operating
table column next to the IR receiver.
2. The adhesive labels are affixed to the back of the IR
remote control with LCD.
The adhesive code labels bear a number from 0
to 9:
1. left: 0, 1, 2 ...9
2. right: 0, 1, 2 ...9
Examples of preset IR system codes Markings:
1 5
3 0
2 3
8 9
Figure 2-25 Code label

If the IR remote control with LCD is not shipped with the operating table, you
can attach the code label to the operating table and the IR remote control
yourself after the match code operation is executed.