Mindray HyBase 8300 Скачать руководство пользователя страница 3

Страница: 3 / 176

Copyright

The device bears CE mark indicating its conformity with the provisions of the Council Directive

93/42/EEC concerning medical devices and fulfills the essential requirements of Annex I of

this directive.

The device complies with the requirements of EN/IEC 60601-1-2 “Electromagnetic

Compatibility – Medical Electrical Equipment”.

For this Operator’s Manual, the issued date is 2015-05 (Version: 2).

Intellectual Property Statement

NANJING MINDRAY BIO-MEDICAL ELECTRONICS CO., LTD. (hereinafter called Mindray)

owns the intellectual property rights to this Mindray device and this manual. This manual can

refer to information protected by copyrights or patents and does not convey any license under

the patent rights or copyright of Mindray, or of others.

Mindray intends to maintain the contents of this manual as confidential information. Disclosure

of the information in this manual in any manner whatsoever without the written permission of

Mindray is strictly forbidden.

Release, amendment, reproduction, distribution, rental, adaption and translation or any other

derivative work of this manual in any manner whatsoever without the written permission of

Mindray is strictly forbidden.

are the trademarks, registered or otherwise, owned by

Shenzhen Mindray Bio-Medical Electronics Co., Ltd.

，

are the

trademarks, registered or otherwise, owned by Nanjing Mindray Bio-Medical Electronics Co.,

Ltd in China and other countries. All other trademarks that appear in this manual are used only

for informational or editorial purposes. They are the property of their respective owners.

Содержание HyBase 8300

















































































































































































Результаты поиска

Содержание HyBase 8300

Отзывы:

Похожие инструкции для HyBase 8300

Бренды по названию

Популярные бренды

Mindray HyBase 8300, Руководство оператора

Результаты поиска

Содержание HyBase 8300

Отзывы:

Похожие инструкции для HyBase 8300

Бренды по названию

Популярные бренды