Mindray HyBase 8300, Руководство оператора

Страница: 27 / 176

System Overview
1-17
hazards.

When using such medical devices as electrosurgical units, defibrillators or
defibrillator monitors, be sure to keep the patient from touching the metallic
parts of the operating table or of the accessories. Moreover, make sure the
patient is not lying on a wet surgical drape or a conductive pad. Otherwise,
the patient can be burned.

Do not use such devices as cell phones, radio equipments and MR
equipment around the operating table.

If an antistatic pathway is required, be sure to use the operating table on an
antistatic floor.

Be sure to only use accessories made by Nanjing Mindray on the operating
table. Accessories produced by other manufacturers must not be used if
they affect or modify the longitudinal geometry of the table top, unless their
use is expressly permitted by Nanjing Mindray. Use only spare parts
approved by Nanjing Mindray.

Before using accessories, be sure to read the operator’s manual thoroughly.

Used operating tables, including their batteries and accessories, should be
disposed of in compliance with local governmental or hospital regulations.
1.5.2 Instructions against Property Damage

Do not modify the operating table or accessories without authorization of
Nanjing Mindray.

Make sure the operating table is serviced or maintained by the authorized
personnel only. Otherwise, it may void the warranty.

Before moving the operating table, make sure the path is clear. Do not
damage the castors or other parts during the movement.

When moving the operating table, be sure to use both hands to
adjust/control the movement. Keep the operating table from colliding with
other things.

If the table top has descended to a low position, exercise caution when
adjusting the operating table. Keep the table top from colliding with the base
or the ground.

If the head/leg plate has been positioned downward, exercise caution when
adjusting the operating table. Keep the head/leg plate from colliding with the
base or the ground.

When sloping the table top or adjusting the leg plates, make sure they do