Mindray HyBase 8300 Скачать руководство пользователя страница 135

Страница: 135 / 176

Arm Board

9-3

9.2.3 Installation and Use

9.2.3.1 Inspection before Use

The arm board is maintenance-free. However, wear due to use and aging can compromise its

functionality and safety. Check it carefully each time before use. Do not use it if you see any

sign of wear or damage.



Be sure to check the arm board each time before use. Do not use the worn

or damaged arm board.

9.2.3.2 Installation and Use

Slide the clamp housing onto the side rail of the operating table.

Tighten the locking screw to lock the clamp.

Insert the vertical pole of the arm board into the opening of the clamp.

Adjust the vertical pole to a suitable height.

Tighten the locking handle to lock the arm board.

Adjust the arm board vertically and/or laterally to a suitable position.

Secure the patient’s arm with the fastening strap.

Make sure both the clamp and the arm board are reliably installed.



Only the radial clamps match the vertical pole of the heavy arm board. Do

not use other clamps. Otherwise, it can cause personal injury and/or

property damage.



Make sure the clamp is tightly locked on the side rail and positioned upright.

Otherwise, the arm board can fall and cause personal injury and/or property

damage.



Make sure the arm board is tightly fixed by the locking handle and

positioned upright. Otherwise, the arm board can fall and cause personal

injury and/or property damage.



The maximum load of the arm board is 8.5 kg. Do not use it beyond this

limit.

Содержание HyBase 8300

















































































































































































Результаты поиска

Содержание HyBase 8300

Отзывы:

Похожие инструкции для HyBase 8300

Бренды по названию

Популярные бренды

Mindray HyBase 8300, Руководство оператора

Результаты поиска

Содержание HyBase 8300

Отзывы:

Похожие инструкции для HyBase 8300

Бренды по названию

Популярные бренды