Mindray BeneVision N1, Руководство оператора

Страница: 45 / 285

3 - 10 BeneVision N1 Patient Monitor Operator’s Manual
3.6.5 Configuring the Displayed Quick Keys (only available for the independent
external display)
To select the quick keys you want to display, follow this procedure:
1. Access Quick Key in either of the following ways:
◆
Select the Screen Setup quick key
→
the Select Quick Keys tab.
◆
Select the Main Menu quick key
→
from the Display column select Quick Keys .
2. Select the Current tab to configure the quick keys you want to display on the screen: From the top of this
page, select a block where you want to show a certain quick key, and then select the quick key from the
quick key list. For example, if you want to show the
Screen Setup quick key at the first block, select the first
block, and then select Screen Setup from the list.
3. Select the More tab to configure the quick keys you want to display when the More quick key is selected.
3.7 Operating Modes
The monitor provides different operating modes. This section describes the monitoring mode and the standby
mode.
3.7.1 Monitoring Mode
The monitoring mode is the most frequently used clinical mode for patient monitoring. When the monitor is
turned on, it automatically enters the monitoring mode.
3.7.2 Module Mode
When the N1 is connected to the host monitor, the N1 enters the module mode. For connection of the N1 and
the host monitor, see section
2.8N1 in Use with the Host Monitor . The N1 monitor has the following features when
it enters the module mode:
■ The patient information, parameter setup, and alarm setup of the N1 and the host monitor will be
synchronized. For data transfer strategy, see the operator’s manual of the host monitor.
■ The N1 can still store the parameter data and the alarm events.
■ The N1 receives and stores the parameter trends data from the host monitor.
■ All audible sounds of the N1 are off.
■ Wired and wireless network of the N1 are not available.
■ The alarm indications of the battery related alarms of the N1 are given by the host monitor.
■ Turning on or off the host monitor simultaneously powers on or off the N1.
■ The main screen of the N1is off when it is connected to the host monitor through the SMR or the module
rack of the host monitor.
The N1 resumes to monitor mode when it is disconnected from the host monitor.
3.7.3 Privacy Mode
The privacy mode is a special clinical monitoring mode. In the privacy mode, the monitor does not display
patient information and monitoring data. This provides controlled access to patient data and ensures
confidentiality.
The privacy mode is only available when the patient admitted by the monitor is also monitored by the CMS. The
monitor continues monitoring the patient, but patient data is only visible at the CMS.
GCS
Enters the GCS menu. Rescue Mode Enters the rescue mode.
Symbol Label Function Symbol Label Function