MIMAKI TEXTILE JET TX1800B, Руководство по эксплуатации

Страница: 96 / 222

3-16
9
Press the key.
10
Press to select the head to clean by block.
• The heads are divided into two blocks of [1234] and [5678].
11
Press to select the execution of the cleaning.
• When the cleaning is not made, the display shows [----].
12
Press the key.
13
Press to select one of the cleaning type.
• Set Value : Normal / Soft / Hard / Mix
• When you select “Mix”, perform cleaning by combining
cleaning type depending on the head temperature.
14
Press the key.
15
Press to select the interval before performing
the cleaning.
• Set Value : 1 to 250m
16
Press the key.
17
Press to select the cleaning method when
you printed using copy function of RIP.
• Select a setting value from either of below:
•
Boundary : Perform cleaning between printing data.
Length : Perform cleaning at the cleaning intervals
(printing length) set in the Step 15.
18
Press the key.
19
Press the key several times to end the setting.
• The setting performed here is only valid when you printed with the copy function of RIP.
The cleaning intervals (printing length) set in the Step 15 is applied to those when
performing normal printing.
T YPE 1
C o l o r : 1 2 3 4 1 6 7 8
T YPE 1
C o l o r : 1 2 3 4 5 6 7 8
T YPE 1
C o l o r : 1 2 3 4 - - - -
T YPE 1
T y p e
: N o r ma l
T YPE 1
T y p e
: S o f t
T YPE 1
I n t e r v a l : 1 0 m
T YPE 1
I n t e r v a l : 9 m
T YPE 1
P r i o r i t y
: B o u n d a r y