MIMAKI TEXTILE JET TX1800B, Руководство по эксплуатации

Страница: 74 / 222

2-34
Detecting the Media
Media detection is a function for setting the printable area.
1
Press on the media selection screen, and
select ROLL/LEAF.
• If “LEAF” is selected, go to the step 5.
2
Press the key.
3
Press to input the media remaining, and
press the key.
• The setting of the media remaining can be checked on the P.3-38
“Confirming Machine Condition”.
4
Input width of the printing area.
• Set the printing area in the Y direction.
If you know the printing width:
(1) Press to input the value.
(2) Press the key.
• The carriage moves.
If you do not know the printing width:
(1) Press the key to select "MANUAL".
(2) Press the key.
• The carriage moves.
5
Set the printing origin.
(1) Press to move the carriage to the print start
position (origin).
• Put an arrow mark of the carriage on the setting position.
(2) Press the key.
• If "MANUAL" is set on the Step 5, go to the Step 7.
• If a number is entered for the printing width on the Step 5, the left
end of the printing area is automatically adjusted to the entered
number, and the mode is returned to the LOCAL. Skip the step 7.
• When inputting the printing width with , be careful that it may print out of
the media depending on the print start position set on the Step 6.
MED I A SE T
ROL L < > L EA F
Me d i a P s t h
C h e c k : e n t
MED I A SE T
C a p a c i t y = 2 m
PR I NT AREA
Wi d t h = 1 8 6 0 mm
PR I NT AREA
Wi d t h = M ANUA L