MIMAKI TEXTILE JET TX1800B, Руководство по эксплуатации

Страница: 22 / 222

1-8
Operation Panel (Rear surface of media feeding system)
Name Function
(1)
Adjusting dial Adjusts the pressure of the pressure roller.
(2)
[BELT] button
When you press “ I ”, the belt will move, and when you press “O”, it
will stop.
(3)
[FEEDING] button
When you press “ I ”, the media will be fed, and when you press “O”,
it will stop.
(4)
[PRESSURE CYLINDER]
UP(

/DOWN(

) switch
When you press UP (

), the roller will move up, and when you press
DOWN (

), the roller will move down.
(5)
[CENTERING MANUAL] lever
Rotating to right or left, adjust the media position manually. In the
AUTOMATIC mode, you cannot adjust even if you operate the lever.
After adjusting the position in the MANUAL mode, change to the
AUTOMATIC mode.
(6)
[AUTOMATIC] lamp When it is in the AUTOMATIC mode, this lights in green.
(7)
[FEEDING MANUAL] lever
The rotating direction of the take-up motor changes depending on
the lever direction.
(8)
[MEDIA END] switch
When it lights in green by pressing this, the media end detection
becomes valid.
(9)
Air pressure gauge Displays the pressure of the pressure roller.
(10)
[Emergency] button Immediately stops this machine under operation.
(11)
[FEEDING AUTOMATIC] lever
Determines the media rotating direction of the take-up device when
you set BELT ON in the AUTOMATIC mode. Rotate this to the left or
the right depending on the media rotating direction.
1 2 3 4 5
6 7 8
9 10 11