MIMAKI TEXTILE JET TX1800B, Руководство по эксплуатации

Страница: 92 / 222

Setting the Printing Quality
3-12
11
Press to select the drop size.
• Set Value : L3M2S1, L4M2S1, L5M3S1, L4M3S2, L5M4S3
• Select from the five types above. "M" or "S" cannot be set
separately even if is pressed.
12
Press the key.
• Press the key several times to end the setting.
Combination of Factors That Can Be Set
Here, the combinations with the 8 color ink set are described. In the case of the 4 color ink set, the number of
pass would become one half.
• To make effective the value set while printing, set the priority order of the media correction on the
"Panel" referring to P.3-13 “Setting Priority Order”.
• Printing continuously in condition of high ambient temperature may cause white lines or blur
depending on the ink or drawing mode used. (Sublimation dye ink and reactive dye ink tend to cause
white lines or blur.)
In this case, switch the drop size in the printing mode of RIP used to "3,3,3" "4,4,4" "5,5,5" or other
mode of the dot size. It can extend the maintenance cycle of the head being used, and can reduce
white lines or blur.
Resolution
(dpi)
Bidirectional Unidirectional
Resolution
(dpi)
Bidirectional Unidirectional
Pass High Speed Pass High Speed Pass High Speed Pass High Speed
300x300
dpi
2 2
600x600
dpi
4 4
4 4 8 8
ON / OFF
8 8 16 16
300x450
*1
dpi
*1. Even with the use of 4 color ink set, the number of pass does not change.
3 3
600x900
dpi
6 6
6 6 12 12
ON / OFF
12 12 24 24
300x600
dpi
4 4
900x450
*1
dpi
3 3
8 8 6
ON / OFF
6
ON / OFF
16 16 12 12
450x450
*1
dpi
3 3
900x900
dpi
6 6
6
ON / OFF
6
ON / OFF
12
ON / OFF
12
ON / OFF
12 12 24 24
450x600
dpi
4 4
1200x600
dpi
4 4
8
ON / OFF
8
ON / OFF
8
ON / OFF
8
ON / OFF
16 16 16 16
600x300
dpi
2 2
1200x900
dpi
6 6
4
ON / OFF
4
ON / OFF
12
ON / OFF
12
ON / OFF
8 8 24 24
600x450
*1
dpi
3 3
1200x1200
dpi
8 8
6
ON / OFF
6
ON / OFF
16
ON / OFF
16
ON / OFF
12 12 32 32
• of the list above are the recommended mode for actual use.
• The lower the resolution or the pass is set than the recommended mode for actual use, the lower the
image quality becomes.
• An image quality also lowers depending on the used ink or media, preprocessing or the like. Perform
test printing ( P.2-36) before printing an actual data, and select the mode to use.
T YPE 1 : 6 0 0 x 4 5 0
D r o p S i z e : L 4 M2 S 1
ON / OFF
ON / OFF