83
0050
Maintenance
Preventive maintenance has been reduced to a
minimum by the careful design of reliable compo-
nents and material.
However, the following measures should be
taken at regular intervals and in proportion to the
hours of service.
Daily
•
Check the door lock and interlock before
starting operations.
•
Start the machine and check that the door
remains locked while the machine is
operating. Use the Rapid Advance function to
step the program to the Stop position and
check that the door stays locked until 30
seconds after the program is completed.
•
Clean the door seal and remove powder
residue. Check that the door does not leak.
•
Clean the detergent compartments and wipe
down the machine with a damp cloth.
•
Check that the drain valve does not leak, and
that it opens properly.
Weekly
•
Remove lint or fluff remnants from the drain
opening, joints in drain pipes, etc.
Every third month
•
Check for leaks in valves, hoses and
connections.
•
Check that the V-belts between the motor and
pulley is undamaged and correctly tensioned.
Make certain that all electrical power to
the machine is shut off before removing
top or rear panels.
Maintenance
Fig.
88
88