24
Hot
Prewash
After the machine has started and the door
automatically locked, the drain valve will close
and the hot and cold water valves will open to fill
the machine with mixed hot and cold water to the
level determined by the level control. At the same
time detergent from compartment 1 is mixed with
the incoming water.
When this level is reached, both water valves will
close. During filling and then through the wash
program the drum has a reversing rotation.
At the end of the prewash, the drain valve will
open.
Mainwash
After draining the drain valve will close again and
hot water will fill to the level determined by the
level control. At the same time detergent from
compartment 2 is mixed with the incoming hot
water.
The water level controlled machine will now wash
the fabrics for 6 minutes. The machine is then
emptied, followed by a 30 second extraction.
Rinses
Hot and cold water are filled to the medium level
for the first rinse which lasts one minute, followed
by spin extraction for 30 seconds. After the
extraction comes the second rinse in cold water,
ending with extraction, whereafter the third rinse
is started. Fabric softener is automatically
admitted during the third rinse. The fabrics are
rinsed in cold water for two minutes followed by
an extraction of four minutes duration.
HOT
Time
Temp.
(Min.)
Prewash
3
Warm
Detergent 1
Drain
1
Mainwash
6
Hot
Detergent 2
Drain
0.7
Extraction
0.5
Rinse 1
1
Warm
Drain
0.7
Extraction
0.5
Rinse 2
1
Cold
Drain
0.7
Extraction
0.5
Rinse 3
2
Cold
Detergent 3
Drain
0.7
Extraction
4
Total time
22
(water fill time
not included)
Wash Cycles
44
Fig.
44