Water supply
NOTE!
All plumbing must conform to national
and local plumbing codes.
The water supply to the machine should be fitted
with manual shut-off valves to facilitate installa-
tion and servicing.
Water inlets are labelled for hot and cold water
connections. Hoses should be flushed through
before being connected to the machine.
Connection hoses should be 3/4" reinforced
rubber hosing not to exeed 6 ft in length. Make
sure the hoses have no sharp bends or angles.
Water pressure should be:
maximum:
142 psi (10 kp/cm
2
)
recommended:
25-85 psi (2-6 kp/cm
2
)
7
0248
1597
1598
Cold water
Hot water
Fig.
7
Fig.
8
Fig.
9
Installation
7
8
9