11
1822
16
Function control check-out list
In the machine cylinder, you will find the warranty
registration card, a copy of the warranty policy
and other pertinent material.
The warranty card should be completed and sent
to Wascomat. All other items should be placed in
a safe place for future reference.
The machine should be cleaned when the
installation is completed and checked out as
detailed below without loading the machine with
fabrics:
1. Check the incoming power for proper voltage,
phase and cycles.
2. Open manual shut-off valves to the machine.
3. Turn on electric power.
4. Check the door safety interlock as detailed on
page 10 of this manual.
5. Select the HOT program and start the
machine.
6. Run through a complete cycle, checking for
water temperature, drain operation and the
extract function.
7. In the mainwash only hot water should enter.
If cold water comes in, the hoses are
improperly connected. Reverse hot and cold
water hoses.
NOTE
All machines are factory tested prior to
shipment. Occasionally, some residual
water may be found when the machine is
installed.
17
HOT
Time Temp.
(Min.)
Prewash
3
Warm
Detergent 1
Drain
1
Mainwash
6
Hot
Detergent 2
Drain
0.7
Extraction
0.5
Rinse 1
1
Warm
Drain
0.7
Extraction
0.5
Rinse 2
1
Cold
Drain
0.7
Extraction
0.5
Rinse 3
2
Cold
Detergent 3
Drain
0.7
Extraction
4
Shake-out
0.5
Total time
22
(water fill time
not included)
1203
Fig.
17
Fig.
16
Installation