Migatronic RCI2, Руководство пользователя

Страница: 51 / 80

50 51
Sigma Galaxy - Welding program selection and analog input - 10010201
Analog Configuration file –
Sigma Galaxy - Welding program selection
Analog Configuration – 10010201 v1.0
Sigma Galaxy – Welding program selection and analog input
10010201 Page 2 of 2
DIGITAL OUTPUTS (JMP3=Active-HIGH)
Pin# /
Military
Plug
Symbol Name Description Active
17 / d DOUT0 Arc-Detect Arc-Detect Status
Output is H when welding arc is present.
H
18 / j DOUT1 Pulse Pulse Status
Output is H when pulse is activated.
H
19 / k DOUT2 Duo Plus Duo Plus Status
Output is H when duo plus is activated.
H
20 / h DOUT3 !Error Global Error Status
Output is H when status is OK.
Output is L when some errors are active (interface,
machine or feeder).
L
21 / e DOUT4
ANALOG INPUTS
Pin# /
Military
Plug
Symbol Name Description Range
25 / E AIN0 Welding C) Set Welding Current / Wire Inch Speed
Control welding current in real-time. Welding current cannot
be controlled from interface, if machine is in job mode. This
input is scaled with the maximum power module size. For
500A power source this means:
0V  0A ; 5V  250A ; 10V  500A
For 400A power source:
0V  0A ; 5V  200A ; 10V  400A
If wire inch is active, this input controls the wire inch speed:
0V

0m/min ; 10V

maximum wirespeed of the selected
wirefeeder.
0-10V
26 / F Welding Current(-)
27 / A AIN1 Welding Voltage
Trim(+)
Set Welding Voltage Trim
Control welding voltage trim in real-time. Voltage trim
cannot be controlled from interface, if machine is in job
mode:
0V

-9.9V ; 5V

0V ; 10V

+9.9V
0-10V
28 / B Welding Voltage
Trim(-)
29 / f AIN2
30 / g
ANALOG OUTPUTS
Pin# /
Military
Plug
Symbol Name Description Range
31 / L AOUT0 Measured C) Read Measured Welding Current
Measure welding current in real-time:
0V  0A ; 10V  1000A
0-10V
32 / M Measured Current(-)
33 / J AOUT1 Measured V) Read Measured Welding Voltage
Measure welding voltage in real-time:
0V  0V ; 10V  100V
0-10V
34 / K Measured Voltage(-)