Midea SMK-60/CGN8, Руководство по обслуживанию

Страница: 78 / 86

M-Thermal Split
201909 77
4.20 Pb Troubleshooting
Digital display output
Description

Water side heat exchanger anti-freeze protection.

M-Thermal Split stops running.

Error code is displayed on hydronic box main PCB and ANTI.FREEZE icon is displayed on user interface.
Possible causes

Normal system protection.

Temperature sensor not connected properly or has malfunctioned.

Hydronic box main PCB damaged.
Procedure
Pb
Outdoor ambient temperature is lower
than 4°C
Yes
Normal system protection. The system
will resume automatically
1
No
Water side heat exchanger water outlet
temperature sensor, water inlet
temperature sensor or backup electric
heater outlet water temperature sensor
loose
2
Yes
Ensure the temperature sensor is
connected properly
No
Water side heat exchanger water outlet
temperature sensor, water inlet
temperature sensor or backup electric
heater outlet water temperature sensor
has short-circuited or failed
3
Yes
Replace the temperature sensor
No
Replace outdoor main PCB
Notes:
1. Refer to Part 3, 5.7 “Water Side Heat Exchanger Anti-freeze Protection Control”.
2. Backup electric heater water outlet temperature sensor, water side heat exchanger water inlet temperature sensor and water side heat exchanger water
outlet temperature sensor connections are port CN6 on the hydronic box main PCB (labeled 11 in Figure 4-2.1 in Part4, 2.2 "Main PCB for Hydronic
System").
3. Measure sensor resistance. If the resistance is too low, the sensor has short-circuited. If the resistance is not consistent with the sensor’s resistance
characteristics table, the sensor has failed. Refer to Part 2, 1.2 “Hydronic Box Layout” and to Table 4-5.3 in Part 4, 5.1 “Temperature Sensor Resistance
Characteristics”.
Midea CAC Confidential