36 / 72
HBC-series V7 LV+MV
One-way
Car
brake is on a separate
channel
.
The throttle is controlled by the main control channel, brake by auxiliary. If the brake is activated (brake driver / activator is out of neutral, i.e.
outside the STOP position), it is immediately ignored the signal from the throttle channel and the brake starts with the intensity of both set in
parameter P22, both the value of the brake signal. If you stop braking, the motor is driven at speed (PWM output ...) by signal corresponding to
the value of throttle signal. Location P7 and P8 on then throttle channel can coalesce to the same value (such as P10 and P1).
Memory select
Controller has 4 memory banks for storage parameters (for 4 different parameters setting).
Default values (company setting) in these memory banks is following: (you can any time come back to these values by button “
Default settings
”):
-
memory #1 (model 1)…. car bidirectional
-
memory #2 (model 2)…. boat bidirectional
-
memory #3 (model 3)…. aircraft one way
-
memory #4 (model 4)…. aircraft one way,
const. rpm
From the production is pre-set select of
memory #1
Nevertheless you can any time change set-
tings of parameters in these memory banks,
by your own request and needs.
Select memory bank in program
Controller 2
and write by button „
Write setting
“
(available when change some parameter
IMPORTANT:
Change of content of selected memory bank (i.e. parameters values) is possible make only by PC!
To change the "Default basic" to "Default advanced" (and vice versa) are set to all parameters default values !
When you want change some parameter(s),
necessary first select memory bank in program
„
Controller 2
“ in which you want make chang-
es. After this selection you can change all parameters by your needs and after pushing button “
Write setting
” will be these new values of
changed parameters write to selected memory banks.
All changes of any parameter are related to selected memory bank.
Note:
No possible make this process in reversal order, i.e. no possible change parameter first and after this select memory bank
!
Divided control BRAKE / THROTTLE
●►
fig. 9
P9
Braking intensity
P10
M
ode CAR:
one way mode
=
M
ode CAR:
one way mode
»
●►
fig. 10
BRAKE
THROTTLE
P8
P6
P7
STOP
P11
