60 / 72
HBC-series V7 LV+MV
NEUTRÁL
Full throttle forward
Full throttle backward
NEUTRÁL
Min. throttle
Full throttle
Min. throttle
Min. throttle
Start with
Automatic
throttle limits
In the parameter
P4
, „
Control signal
” is set „
Automat
“, this is also default setting.
Very helpful information about how controller evaluates the current
position of the throttle stick, give LEDs of the controller.
Signal sources
with NEUTRAL
(
with lock of
STOP
position
)
(position
STOP
is identical with the position „
Neutral
“ )
1) Turn on control signal source with joystick (potentiome-
ter, control signal, …) in „
Neutral
“ position (=STOP)
2) Turn on controller, wait for
blue LED
+
yellow LED
continuous 1× short beep …………..
3) Controller alternately light
yellow LED
and
green LED
challenge to moving throttle stick from
“
neutral
” to “
full throttle forward
” position.
After finishing of motion light
green LED
+ 3× short beep
4) Controller alternately light
green LED
and
red LED
challenge to moving throttle stick from
“
full throttle
forward
” position to “
full throttle backward
” position.
After finishing of motion light
red LED
+ 2× short beep
5) Controller alternately light
red LED
and
yellow LED
challenge to moving throttle stick from
“
full throttle
backward
” position to “
neutral
” position.
After finishing of motion light
yellow LED
+ 2× short
beep + play melody
6)
You can start now (controller is ready to run).
Signal sources
without NEUTRAL
(without lock of STOP position)
(position
STOP
is identical with the posi
tion „
Min. throttle
“ )
1) Turn on control signal source with joystick (potentiometer,
control signal, …) in „
Neutral
“ position (=STOP))
2) Turn on controller and wait for
blue LED
+
yellow LED
continu
ous 1× short beep
3) Controller alternately light
yellow LED
and
green LED
challenge to moving throttle stick from “
neutral
” to “
Full
throttle
” position.
After finishing of motion light
green LED
+ 3× short beep.
…
4) Controller alternately light
green LED
and
red LED
challenge to moving throttle stick from
“
Full throttle
”
position to “
Min. throttle
” position.
After finishing of motion light
red LED
+ 2× short beep
5)
Stay on this “
Min. throttle
” position (STOP) at least
3 seconds, controller light
yellow LED
+ play melody
6)
You can start now (controller is ready to run).
♪
♪
♪
♪
♪
♪
♪
♪
>3 sec.
♪
wait
♪
♪
♪
♪
♪
♪
♪
♪
♪
wait
0.15 V
(1 ms)
+1.65 V (1.5 ms)
+3.15 V
(2 ms)
Neutral=STOP
forward
backward
100% backward
100% forward
STOP position (NEUTRAL)
½ throttle
max. throttle
min. throttle
(=STOP)
0.15 V
(1 ms)
+1.65 V (1.5 ms)
+3.15 V
(2 ms)
STOP position
100% forward
½ throttle
