mensor CPG2500, Руководство по эксплуатации

Страница: 55 / 86

Operating Instructions - CPG2500 55
Precision Pressure Indicator
CPG2500
Ptype? <sp>CCCCC<cr><lf> Returns “Absolute” or “Gauge” for the
pressure type
RangeMax? <sp>n.nn<cr><lf> Returns the maximum range of the ac-
tive transducer in the current units
RangeMin? <sp>n.nn<cr><lf> Returns the minimum range of the ac-
tive transducer in the current units
Rate? <sp>n.nn<cr><lf> Returns the rate reading of the instru-
ment in current units/current time unit
(see: Runits)
Rdecpt? <sp>n<cr><lf> Returns the number of rate decimal
points (see: Resolution)
Release? 15 char string.
Ex:
Release? Test stand 1
Returns:
<sp>(YES or NO), CCC…
CCC<cr><lf>
This command is used to release
control of the instrument in a multiple
computer environment.
Yes if release is successful
No if instrument is being controlled
with another computer
CCC… = name of controlling com-
puter or AVAILABLE
See: Acquire? and Unlock
Resolution <n> Sets the number of significant digits
(see: decpt)
Resolution? <sp>n<cr><lf> Returns the number of significant dig-
its (see: decpt)
Rfilter Value in % Sets the % of the rate filter
Rfilter? <sp>n.nn<cr>
<lf>
Returns the rate filter
Runits Sec, min, hr Sets the rate time unit
Runits? <sp>XXXX<cr><lf> Returns the rate time unit
Save_cal Save calibration values
Save_linearity Save linearity values
Sbaud 9600, 19200, 38400, 57600, 115200 Sets the serial baud rate
Sbaud? <sp>XXXX<cr><lf> Returns the serial baud data
Sdata 7 or 8 Sets the serial data bits
Sdata? <sp>n<cr><lf> Returns the serial data bits number
Sensorid? <sp>Mensor,SN XXXXXX, VN.NN Returns the active sensor’s serial
number and firmware version
Span desired pressure or ? Sets span on active transducer or for
?, clears previous value, must be >
50% FS and has a 1% limit. CALDIS-
ABLE must be OFF/NO.
Span? <sp>XXXXXXX<cr><lf> Returns span scale factor for active
transducer
Sparity Even, ODD, NONE Sets the serial parity
Sparity? <sp>CCCC<cr><lf> Returns the serial parity