mensor CPG2500 Скачать руководство пользователя | Manualshive

Страница: 9 / 86

background image

Operating Instructions - CPG2500

9

Precision Pressure Indicator

CPG2500

2 Safety Notices

2.1 User Responsibilities
To ensure safety, the user must make sure that:
• The system is used properly, no dangerous media are used and that all technical specifications are

observed.

•  The system is operated in perfect operating condition.
•   This operation manual is legible and accessible to the user at the system’s location.
•   The system is operated, serviced and repaired only by authorized and qualified personnel.
•   The operator receives instruction on industrial safety and environmental protection, and is knowledge-

able of the operating instructions and the safety notices contained therein.

2.2 General Safety Notices

i

Notice

The system should only be operated by trained personnel who are familiar with

this manual and the operation of the instrument.

Warning

!

WARNING: A condition for trouble-free and safe operation of this system is proper

transport, proper storage, installation, assembly and proper use as well as careful

operation and maintenance.

Any operation not described in the following instructions should be prohibited.

The system must be handled with care required for an electronic precision instru-

ment (protect from humidity, impacts, strong magnetic fields, static electricity and

extreme temperatures). Do not insert any objects into the instrument.

The system is powered via the power cable with a voltage that can cause physi-

cal injury. Even after disconnecting the system from the power supply, dangerous

voltages can temporarily occur due to capacitance.

Extreme care must be taken with pressure connections when using hazardous or

toxic media.

Repairs must only be performed by authorized service personnel.

i

Notice

Additional safety notices are found throughout this manual.

«
...
7
8
9
10
11
...
»

Содержание CPG2500























































































Отзывы:

Нет отзывов

Похожие инструкции для CPG2500

Бренд: cable matters Страницы: 17

Бренд: Radio Shack Страницы: 40

Бренд: SIIG Страницы: 8

Бренд: SSK Страницы: 6

Бренд: Nitho Страницы: 6

WEATHER STATION

Бренд: iT+ Страницы: 16

Бренд: Viro Страницы: 3

Бренд: Renkforce Страницы: 8

Бренд: Digifast Страницы: 28

Бренд: StarTech.com Страницы: 2

Бренд: StarTech.com Страницы: 2

Бренд: StarTech.com Страницы: 2

Бренд: StarTech.com Страницы: 2

Бренд: StarTech.com Страницы: 2

Бренд: StarTech.com Страницы: 10

Бренд: StarTech.com Страницы: 17

Бренд: StarTech.com Страницы: 16

Бренд: Vxl Страницы: 31

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды