mensor CPG2500, Руководство по эксплуатации

Страница: 58 / 86

58 Operating Instructions - CPG2500
Precision Pressure Indicator
CPG2500
7.9.2 CPG2500 Error Codes
Code Serial Poll Byte Description Error String Returned
E00 00h No errors NO ERRORS
E05 45h Parameter error EGPIB PARAMETER ERROR: String that was sent
E07 47h Syntax error EGPIB SYNTAX ERROR: String that was sent
7.9.3 SCPI Commands and Queries
STATus
:OPERation
:CONDition?
Returns an integer value representing instrument status that
can be decoded.
Bit 0: Zeroing activ
Bit 1: Control Setpoint has not been reached.
Bit 2: Reserved 0.
Bit 3: Reserved 0.
Bit 5: Measuring. The instrument is actively measuring
MEASure
[:PRESsure][C]?
Returns the pressure from Channel [C]
:TEMPerature[C]? Returns the temperature from Channel [C]
:RATE[C]? Returns the rate/sec from Channel [C]
:BAROmetric? Returns the barometric pressure
CALibration
[:PRESsure][C]
:MODE?
Returns 1=calibrated or 0=not calibrated
:DATE? Returns date of cal “MM/DD/YY”
:DATE <i,i,i> Sets date of cal YYYY,MM,DD
:ZERO? Returns zero offset
:ZERO <n> Sets the zero offset
:ZERO:INITiate Ignored
SENSe
[:PRESsure][C]
:NAME?
Returns sensor name string
:MODE? Returns “ABSOLUTE” or “GAUGE”
:MODE ABS|GAUGE Sets pressure type
:ABS? Returns native sensor type 0=GAUGE 1=ABSOLUTE
:RESolution? Returns resolution (float)
:RANGe
[:UPPer]?
Returns maximum range
:LOWer? Returns minimum range
:UNIT
[:NAME]?
Returns ASCII units (mixed case)
:VALue? Returns the units conversion factor
:REFerence
[:HEIGht]
<n> Sets the head pressure height in cm