mensor CPG2500, Руководство по эксплуатации

Страница: 52 / 86

52 Operating Instructions - CPG2500
Precision Pressure Indicator
CPG2500
7.8 Output Formats
Pressure readings are returned in exponential notation in a format according to the OUTFORM command
as follows. Outform applies to both pressure channels.
1. <sp> pressure value <cr><lf>
2. <sp> pressure, units number,STANDBY <cr><lf>
3. <sp> pressure, pressure rate <cr><lf>
4. <sp> pressure, minimum peak, maximum peak <cr><lf>
7.9 CPG2500 Commands and Queries
Table 7.9 lists all of the current CPG2500 commands and queries.
i
Notice
Channel specific commands are sent to only the active channel.
See ‘CHAN’ command.
Optional emulation modes are available in which a CPG2500 can emulate remote functions of different
brands of pressure gauges. Please contact Mensor for more details.
Table 7.9 - CPG2500 Commands and Queries
Command Data Response/Function
? See Table Below Returns data per the current output
format
A? <sp>n.nn<cr><lf> Returns the A channel pressure read-
ing
AR? <sp>n.nn<cr><lf> Returns the A channel rate
Acquire? 15 char string.
Ex:
Acquire? Test_stand_1
Returns:
<sp>(YES or NO), CCC…
CCC<cr><lf>
This command is used when multiple
computers would like to control the
instrument.
Yes if acquisition is successful.
No if instrument is being controlled
with another computer.
See: Release? and Unlock
Address 1-31 Sets the GPIB Address
Address? <sp>nn<cr><lf> Returns the GPIB Address
Asset_tag 16 char string General purpose string for customer
use.
Asset_tag? <sp>sssssssss<cr><lf> Return customer asset tag string
B? <sp>n.nn<cr><lf> Returns the B channel pressure read-
ing
BR? <sp>n.nn<cr><lf> Returns the B channel rate.
Baro? <sp>+n.nn<cr><lf> Returns reading from barometric sen-
sor or “NO BAROMETER” if one isn’t
installed