FOCKE MELER GLUING SOLUTIONS
4-22
USE
STARBI.
W
i
Manual mode
Error out
Status out
32.
MANUAL MODE
screen.
Here each of the outputs can be activated and deactivated manually. This
mode enables purging, cleaning or depressurising the installation, or
checking the correct operation of the applicators.
A- In manual mode the output channels can be enabled individually.
When enabled they will turn green.
B- You can select whether they will have dotting or not (jointly) and
the size and frequency of dot.
C- You can give the analogue outputs a set value.
D- You can set a countdown activation time. When pressing PLAY, the
enabled channels are activated during that time as they have been
programmed.
E- The Play button changes to Stop while the programmed time
elapses. If the timing function ends or the Stop button is pressed
during the timing, it changes to Play.
In both cases, all enabled channels are deactivated and the timer
returns to its original value.
F- Skip to advanced options screen.
33.
ERROR AND STATUS OUTPUT
screen.
The correct functioning of the error and status outputs can be confirmed on
the MANUAL MODE advanced options screen, activating them manually.
STARBI.
W
i
1
2
3
4
5
6
120 s
Manual mode
Dot bead
Analog output 1
Analog output 1
P
124.7 mm.
5.5
V.
5.5
V.
S
64.7 mm.
Play
Time
A
B
D
E
C
F
!
!