manualshive.com logo in svg

Meler STARBI, Инструкция по эксплуатации, Страница: 30 / 73

Поделиться
Скачать
Meler STARBI Скачать руководство пользователя страница 30

FOCKE MELER GLUING SOLUTIONS

4-2

USE

Change from RUNNING mode to STOPPED mode by inhibit signal

If the ‘Enable inhibit signal’ option is connected and activated, you can switch 

between both modes from an external signal of a PLC or main machine (24 V 

-> RUNNING / 0 V -> STOPPED).

To activate the ‘Enable inhibit signal’ function, access from the ‘Additional 

configuration’/’Enable inhibit signal’ menu. 

With this option activated, the STOP button is disabled and it is not possible to 

change mode manually. 

Note:

 If the inhibit signal keeps the unit in STOPPED mode, it is not possible to 

change to RUNNING mode via Modbus/Profibus communication.

Temperature OK

The temperature OK digital input is used so that the melter can communicate 

to the pattern controller that the adhesive is at the set temperature to start 

production.

The pattern control will never activate the channel outputs (solenoid valves) if 

the temperature is not ‘OK’.

If vinyl glue (cold glue) adhesives are used, the signal must be bridged in the 

corresponding internal connector. 

For more information, see the electrical diagrams of the unit.

Status

When the equipment is in RUNNING mode, the digital output of ‘STATUS’ 

(closed contact) is activated and the central GREEN LED light turns on.

When switching to STOPPED or MANUAL mode, or if the equipment is in 

READY mode, the GREEN LED turns off and the digital output is deactivated 

(open contact). Does not affect the other LEDs.

Error

When the unit detects an error situation (see ‘List of errors and anomalies’) 

it activates the ‘ERROR’ digital output and the RED LED of the central light 

comes on. The unit changes to STOPPED mode. 

If the GREEN or YELLOW LEDs are lit, they turn off to show the new status of 

the unit.

In addition, an alarm warning icon flashes on the HOME screen. It is possible 

to see the list of alarms produced from the ‘Alarms’ option in the main menu

STARBI.

i

Extra settings

 3  

  min

 10  

  ms

Continue after reset

Enable inhibition signal

Enable temperature OK signal

Screen saver time

Sound on alarma

PWM time in 24V

!

Содержание STARBI










































































Отзывы:

Нет отзывов