FOCKE MELER GLUING SOLUTIONS
2-8
INTRODUCTION
Pressure regulator
It is connected to the 0-10 V output (output without isolation) and is used when
a pneumatic supply pressure control is required:
- For the application pump (in the case of piston pumping units)
- For the pressure by-pass valve, in gear pumping
The necessary adhesive flow rate is applied depending on the speed of the
main machine.
This device transforms the output voltage of the controller (0-10 Vdc) into the
corresponding adjustable pneumatic pressure of the pump (0-6 bar).
It can also be used to control the speed of the motors, in gear pumps with a
variable speed through a frequency inverter.
Note:
This peripheral needs 24 Vdc power supply.
Controller bracket
The bracket must be requested separately and there are two types, wall-
mounted for 4-6 outputs and articulated wall-mounted for two outputs.
1.
Vertical stand StraBi 2 outputs
2.
Articulated wall bracket StarBi 2 outputs
3.
StarBi wall bracket 4/6 outputs