FOCKE MELER GLUING SOLUTIONS
4-20
USE
28.
ADVANCED PARAMETERS
screen.
These parameters are configured in the same way as the products by times but with
values in millimetres (mm). The analogue outputs are configured in ramp mode to
have a variable output depending on the speed.
STARBI.
i
1.
10
10
2.
3.
4.
1
2
3
4
5
6
P1
Product 0
Seelct your installation
Select your FC
On
0.0 mm Paso
0.0 mm
Unit: mm
29.
REPETITIVE PRODUCT BY DISTANCE
screen.
The screen appears when you name a new product from the NEW PRODUCT
screen or if you select an existing one from the EDIT PRODUCT screen. The
first thing that is selected is the installation followed by the photocell. The other
parameters are configured with values in millimetres (mm), as in REPETITIVE
PRODUCT BY TIME (page 4-16).
A- If during the execution of a
product the production line
stops (READY status) it is
possible to choose when
the situation is restored,
continue executing the pattern,
continuing from the point
where it stopped, or cancel the
current pattern and wait for a
new product.
B- Machine speed with which you
want to associate an output
voltage value of between 0 and
10 V.
C- Output voltage of the analogue
signal associated with a certain
machine speed.
A
!
STARBI.
i
10
5
0
0
50
100
m/min
voltio
P1
0.0
5
P2
5
10
P3
P4
P5
Product 0
Analog output 1
STARBI.
i
Dot bead
Continue after stop
Analog output 1
Analog output 2
P
0.0 mm.
S
0.0 mm.
Product 0
STARBI.
i
Dot bead
Analog output 1
Analog output 2
Disable FC
0.0
mm.
5.5
V.
5.5
V.
P
0.0 mm.
S
0.0 mm.
Product 0
!
!
C
B