MA-5151-ENG
PATTERN CONTROLLER STARBI
USE
4-9
8.
ENCODER
screen.
There are 3 options to configure the encoder and only one of them can be
active.
STARBI.
i
Encoder
Analog in
Minimun working speed
60
m/mim
Installation 2
Current information saved
New configuration data
STARBI.
i
Saved pulses per meter
1285
Pulses per meter:
1285
Data for new configuration:
New configuration to be saved:
Direct
Speed
Product size
23
mm
Select your FC
800
p/m
Installation 2
2
m/min
Speed:
80m/min
!
!
There are three methods to calculate the new information: direct, by size of
product and by speed.
•
Direct:
the information in pulses per linear metre is entered on a
keyboard.
•
Size of product:
select a photocell to detect the product. Several
products are passed so that the encoder measures the number of
pulses according to the activation and deactivation of the photocell.
The measurement of the product is entered in the detection line of the
selected photocell.
•
Speed:
the speed of the line is entered and the controller will calculate
the ratio from the reading of pulses in a set time.