Meler STARBI Скачать руководство пользователя страница 20

Страница: 20 / 73

FOCKE MELER GLUING SOLUTIONS

INSTALLATION

3-2

Unpacking

Remove the pattern controller from its packaging and check for any possible

damage or breakage. Communicate any damage, including to the external

packaging, to your Focke Meler representative or the Focke Meler Main Office.

Warning:

Reject any packaging that does not have the corresponding labels or

whose information does not match what was requested.

Attaching the device

- Place the controller on a flat and stable surface.

- Fix the base to the desired location by means of the holes indicated for

M6 screws.

Other types of fixings are available, to adapt to different locations or needs.

Consult your Focke Meler Representative or the Focke Meler Main Office.

- Place the controller near the installation (applicators, photocells,

encoder, etc.) so that the cables can be connected easily.

- Place the device at a height where the screen is easily visible and

accessible.

- Leave enough space so that the output of the connection cables is not

forced and can be implemented comfortably.

- The equipment must be positioned in such a way that the disconnection

device is visible and easy to access.

- Avoid places exposed to knocks or vibrations.

Warning:

Make sure the bench on which the base is mounted is level, free

from vibrations and able to support the weight of the device.

Electrical installation

The pattern controllers are supplied to be connected to the 230 VAC

single phase power supply network with neutral, according to their power

consumption.

Good ground connection is always essential.

The maximum consumption values are indicated on the nameplate of the

device.

Warning:

Risk of electric shock. Carelessness may cause injury or death.

Warning:

Avoid connecting the controller on lines that share the circuit with

motors or large devices that may cause fluctuations in the line voltage.

Warning:

Make sure that both the controller and the installation are kept away

from potential sources of electromagnetic interference (frequency inverters,

wireless telephony or public address speakers).

Содержание STARBI










































































Результаты поиска

Содержание STARBI

Отзывы:

Meler STARBI, Инструкция по эксплуатации, Страница: 20 / 73

Результаты поиска

Содержание STARBI

Отзывы: