Meggitt vibro-meter SpeedSys300 ODS301, Руководство пользователя

Страница: 156 / 170

USER MANUAL Document reference MAODS301/E
SpeedSys300 ODS301 overspeed detection system Edition 4 - May 2022
F - 14
Parameters and configuration settings
APPENDIX F: SPEEDSYS300 ODS301 MODBUS REGISTER DEFINITIONS
F.2.3 Device configuration – admin
Table F-8 describes the SpeedSys300 ODS301 Modbus registers related to the module
configuration – admin.
NOTE: The Modbus registers in this data block are read/write.
Table F-7: SpeedSys300 ODS301 Modbus registers – module configuration – user
Address Name
Data
type
Range Access Description
2000 tag_1 char16 Level 0
2008 tag_2 char16 Level 0
2016 tag_3 char16 Level 0
2024 dev_comment char32 Level 0
2040 modbus_addr uint16 1 to 254 Level 0 Modbus address for RS-485 interface
2041 baud_rs485 uint16 0 to 5 Level 0
Coded baud rate for RS-485 interface:
0 – 4800
1 – 9600
2 – 19200
3 – 38400
4 – 57600
5 – 115200.
2042 Reserved uint16 Level 0
2043 parity_rs485 uint16 0 to 2 Level 0 0 – no parity, 1 – even parity, 2 – odd parity
2044 rs485_term uint16 0 to 1 Level 0 0 – RS-485 termination off, 1 – on
2045 crc_dev_user uint16 Level 0 Parameter block CRC
Table F-8: SpeedSys300 ODS301 Modbus registers – module configuration – admin
Address Name
Data
type
Range Access Description
2500 tag_1_adm char16 Level 1
2508 tag_2_adm char16 Level 1
2516 tag_3_adm char16 Level 1
2524 dev_comment_adm char32 Level 1
2540 voting_struct uint16 Level 1
Voting structure - only for reporting.
(For information only.)
2541 crc_dev_adm uint16 Level 1 Parameter block CRC