USER MANUAL
Document reference MAODS301/E
SpeedSys300 ODS301 overspeed detection system
Edition 4 - May 2022
4 - 8
Access levels/permissions
CONFIGURATION OF A SPEEDSYS300 ODS301
To change the access level from User to Admin:
1-
In the SpeedSys300 software, click the
Access level > Admin
menu command.
2-
When prompted, enter the password for the Admin access level.
NOTE:
For a SpeedSys300 ODS301 module, the factory-assigned default password
for the Admin access level is
speedsys
(one word, all lowercase).
3-
After the password is correctly entered, the SpeedSys300 ODS301 module and
SpeedSys300 software will change to the Admin access level.
This change is displayed in the overall module information and controls window (right)
with Access level: Admin.
To change the access level from Admin to User:
1-
In the SpeedSys300 software, click the
Access level > User
menu command.
2-
The SpeedSys300 ODS301 module and SpeedSys300 software will immediately
change to the User access level (that is, no password is required).
This change is displayed in the overall module information and controls window (right)
with Access level: User.
4.6.1 Changing the Admin access level password
For improved security, especially in deployed SpeedSys300 ODS301 overspeed detection
systems, it is strongly recommend to change the default password for the Admin access level.
In the SpeedSys300 software, the Change admin password controls on the Device tab are
used to change the default password for the Admin access level.
NOTE:
When changing the Admin access level password, the password is limited to a
maximum of 16 characters and only the following characters are permitted:
• Alphanumeric characters: 0-9, a-z, A-Z
• Special characters: SP (SPACE) ! " # $ % & ' ( ) * + , (COMMA) - . / : ; < = > ? @
[ \ ] ^ _ ` { } ~
That is, all ASCII (UTF-8) characters between 0x20 (SP) and 0x7E (~) are
permitted, except for 0x7C (VERTICAL LINE).
NOTE:
It is important to note that the longer a password is – the stronger it is.
A combination of uppercase and lowercase letters, numbers and special symbols
is recommended.
To change the default password for the Admin access level:
1-
In the SpeedSys300 software, ensure that the current user access level is Admin
(see
NOTE:
For a SpeedSys300 ODS301 module, the current user access level must be
Admin in order to change the password.
2-
In the SpeedSys300 software, click the
Device
tab to display the associated parameters
and commands.
Содержание vibro-meter SpeedSys300 ODS301
Страница 118: ...THIS PAGE INTENTIONALLY LEFT BLANK...
Страница 126: ...THIS PAGE INTENTIONALLY LEFT BLANK...
