Meggitt vibro-meter SpeedSys300 ODS301, Руководство пользователя

Страница: 60 / 170

USER MANUAL Document reference MAODS301/E
SpeedSys300 ODS301 overspeed detection system Edition 4 - May 2022
3 - 22
Installing a module
INSTALLATION OF A SPEEDSYS300 ODS301
A SpeedSys300 ODS301 module is easily mounted on or removed from a DIN rail (no special
tools are required).
3.3.1.1 Mounting on a DIN rail
As shown in Figure 3-10 (left), to install a SpeedSys300 ODS301 module on a DIN rail:
1- Hook the non-spring-loaded end of the module’s DIN-rail mounting adaptor (top) onto
one edge of the DIN rail (top).
2- Push against the spring-loaded end of the module’s DIN-rail mounting adaptor (bottom)
thereby compressing the springs, while pivoting the module in order to hook the opposite
end of the mounting adaptor over the other edge of the DIN rail (bottom).
3.3.1.2 Removing from a DIN rail
As shown in Figure 3-10 (left), to remove a SpeedSys300 ODS301 from a DIN rail:
1- Use a slotted screwdriver or equivalent tool to pull down the spring-loaded end of the
module’s DIN-rail mounting adaptor (bottom) while pivoting the module in order to
unhook this end of the mounting adaptor from one edge of the DIN rail (bottom).
2- Unhook the opposite non-spring-loaded end of the module’s DIN-rail mounting adaptor
(top) from the edge of the DIN rail (top).
.
Figure 3-10: Mounting (left) and removing (right)
a SpeedSys300 ODS301 module on/from a DIN rail