Settings
73
settings or manually set the access points
again.
Initializing an access point
When you initialize an access point, it returns
to its default settings.
1
From the Home screen,
m
→ "Settings" → "Wireless &
networks" → "Mobile
networks" → "Access Point
Names".
2
m
→ "Reset to default".
sp-mode
sp-mode is an ISP for NTT DOCOMO
smartphones. In addition to Internet
connection, this also provides an email
service that uses the same email addresses
as i-mode (@docomo.ne.jp). sp-mode is a paid
service that requires subscription. For details
about sp-mode, refer to the NTT DOCOMO
website.
mopera U
mopera U is an NTT DOCOMO ISP. If you have
subscribed to mopera U, you can use the
Internet after making the simple settings.
mopera U is a paid service that requires
subscription.
● Setting mopera U
1
From the Home screen,
m
→ "Settings" → "Wireless &
networks" → "Mobile
networks" → "Access Point
Names".
2
Tap to select the "mopera U
（スマートフォン定額）"
(Smartphone flat-rate) or
"mopera U 設定 " (mopera U
settings) radio button.
NOTE
"mopera U設定" (mopera U settings) is the
access point for setting mopera U. When
you use the access point for setting
mopera U, packet communication charges
for setting do not apply. Note that you can
only connect to the initial setting screen or
the setting change screen. For details on
mopera U settings, refer to the mopera U
website.
Subscription to flat-rate packet
communication service is required if you
want to use "mopera U（スマートフォン定額）
" (Smartphone flat-rate). For details on
mopera U (Smartphone flat-rate), refer to
the NTT DOCOMO website.
