Calling/Network Services
63
Set ring time…Enter 0 to 120
(seconds) for the ring time. If the ring
time is set to "0", calls will not be
registered to the call logs.
Deactivate…Makes the Voice mail
service deactivated.
Check setting…Display the setting
state of the Voice mail service.
Play messages…Connects to Voice
mail service center. Follow the guidance
to play back a recorded message.
Setting…Connects to Voice mail service
center. Follow the guidance to change
the Voice mail service settings.
Check messages…Check whether there
is a new Voice mail message. After
checking, the completion message
appears.
Message notification…Turn it on to be
alerted of a new Voice mail message by
a tone.
Notice call…Allows you to configure
settings of the SMS message
notification that will be received for calls
that were missed while the FOMA
terminal was powered off or outside of
the service area. The SMS message
contains the date and time of the
missed call and the caller's phone
number and will be sent the next time
that the FOMA terminal is powered on or
re-enters the service area.
•
Tap "Activate" to specify the type of
missed calls to be notified about.
Select "All calls" to be notified of all
missed calls. Select "Calls with caller
ID" to be notified only of missed calls
with caller ID.
•
Tap "Deactivate" and then tap "OK"
during a notification to deactivate the
notification.
•
Tap "Check setting" to display the
current notification settings.
NOTE
After "Setting" or "Check messages" are
handled or a Voice mail message is
recorded, the "NTT DOCOMO:VM:XX" SMS
message is received.
If you have messages at the Voice mail
service center,
appears in the status
bar. When you drag the status bar
downwards to open the Notifications panel
then tap "Voice mail" → "OK", you are
connected to the Voice mail service center
and messages are played.
remains displayed until all messages are
played.
Messages (SMS) transferred to configure
voice mail settings and notify to the
messages are free of charge.
Call waiting service
When there is another incoming call while you
are on a call, the in-call ringtone notifies you
of the second call. You can answer the
second call by putting the first call on hold.
You can also put your current call on hold and
place a call to another party.
NOTE
Even when the call is on hold, the caller is
charged for a call fee.