McHale
Fusion Vario
Baler & Wrapper
93
Side-tip warning
This warning is shown to alert the operator that the side-tip
(if fitted) is in the transport position and must be moved to
the working position, before operating the machine. This is
to prevent damage to the wrapping ring and side-tip if the
operator forgets to move the side-tip to the working position
when starting a job.
(2051)
Uphill tip warning
When using auto tip, if the uphill angle of the baler is too
steep at the point auto tipping is activated, this warning is
displayed and tipping is halted to notify the operator that the
bale cannot be tipped off at this angle as the bale is likely to
roll away. The operator then has time to reposition the baler
to a more suitable level position and press the ‘tip’ button
(R6) to manually tip the bale. Once tipped, the transfer cycle
will resume. Press ‘ESC’ to silence the alarm.
(2050)
ENVIRONMENT: Reduce paper consumption
Think before printing documents! Is a PDF on a laptop or tablet
sufficient? If a printed copy is required, always select ‘Print on both sides
of paper’ and always try to limit the number of printed pages by selecting
a specific page range or just select ‘Current page’ if that is sufficient.
