McHale
Fusion Vario
Baler & Wrapper
49
4.
Pull approximately 0.8 m of net off
the roll.
Spread the net across the rubber
feed roller. Roll the feed roller
forward, to feed the net into the
netter.
See CST00869.
NOTE:
The net should only be fed in
to a maximum of 70 cm past the
rubber feed roller.
5.
Release the roller tension latch.
Insert the tabbed handle end into the
slot. Push back so the latch can be
raised and then release.
Releasing the latch will compress the
net rollers together.
Return the handle to it’s storage
position.
6.
Centre the net roll on the cradle and
roll it forward directly onto the net
unit, taking up any slack under the
roll.
Adjust the roll guides equally,
allowing 2 to 4 mm clearance each
end, so the roll is centred and tighten
securely.
