96
Baler setup
Auto-tip: When set to On (
), the bale tips automatically during
netting of the next bale in the chamber. When set to Off (
), the Tip
Button must always be pressed to tip the bale.
Wrapper: Used to turn the wrapper On (
) or Off (
).
Wrapper Rotations: This sets the number of wrapper rotations.
Wrapper Film Sensors: Turns the film sensors On (
) or Off (
).
Bale Shape Indicator: Turns the indicator On (
) or Off (
).
Diameter Correction: Used to nudge the actual bale size up or down
slightly so that it accurately matches the diameter setting.
Control unit menu
Screen Brightness
Beeper Volume
NOTE. The machine comes as standard with a single camera, but
operators may fit a 2nd camera, if desired.
Camera Mode - There are up to 5 different camera modes,
depending on whether the machine has 1 or 2 cameras.
Man, Man (x2), Auto, Auto (x2) & Off.
Time and Date setup
FUSION VARIO MENU GUIDE
Baler setup
Auto-tip: When set to On (
), the bale tips automatically during
netting of the next bale in the chamber. When set to Off (
), the Tip
Button must always be pressed to tip the bale.
Wrapper: Used to turn the wrapper On (
) or Off (
).
Wrapper Rotations: This sets the number of wrapper rotations.
Wrapper Film Sensors: Turns the film sensors On (
) or Off (
).
Bale Shape Indicator: Turns the indicator On (
) or Off (
).
Diameter Correction: Used to nudge the actual bale size up or down
slightly so that it accurately matches the diameter setting.
Bale Diameter: Sets the total bale size.
Net Layers: Selects the number of layers.
Net Delay: Sets the delay between the bale full beeps and net
starting to feed.
Bale Density: Sets the main bale density.
Tip down speed: This is used to adjust the speed of the tip down
function. The speed ranges from 1 (slow) to 10 (fast).
Tip pause:
This is used to adjust the tip arm pause time in the down
position during a tip cycle. The pause setting ranges from 1 (short)
to 10 (long).
Tip up speed: This is used to adjust the speed of the tip up function.
The speed ranges from 1 (slow) to 10 (fast).
Bale roll feature: This feature is particularly useful in dusty/windy
conditions. It helps to stick the film end tails for better bale
presentation/shape. The duration of the bale roll ranges from
0 - 15 s. Set to 0 s to disable.
Core Density: Sets the bale core density.
Net menu
Core Diameter: Sets the bale core size.
Net Stretch: This setting sets the stretch on the net applied to each
bale, depending on the option selected. The setting ranges from 1
(min) to 10 (max).
Additive: This feature is used to activate/de-activate an additive
applicator.
Roll before wrap: The duration of the bale roll ranges from
0 - 10 s. Set to 0 s to disable.
