McHale
Fusion Vario
Baler & Wrapper
135
11.
Swing both V-shaped plates (CZH03852) over the main side-tip pivots on the left
and right mounting brackets and secure onto the stub shafts using linch pins. (
N
)
12.
Swing both U-shaped plates over the suspension cylinder
pivot and secure using the latch pin (ABD00080) and linch
pin. (
O
)
13.
Panel guards are provided to ensure that the wrapped bale is protected, from
sharp edges, as it exits the machine. (
Q & R
) Fit panel guards to the left and right
sides of the machines, using three M10 x 35 setscrews.
14.
When the side-tip is being transported, the transport pin must be in the transport
position. The transport pin must be removed from its storage position on the
suspension mount (
S
) and repositioned into the transport position (
T
) on the rear
cradle. Always use the linch pin to secure the transport pin in either location.
L
N
L
N
M
M
O
Q
R
