McHale
Fusion Vario
Baler & Wrapper
102
8.3 Wrapping process
The wrapping process starts automatically as soon as the bale has been transferred
from the bale chamber to the wrapping table (bale transfer cradle in the home position,
chamber door closed, rear wrapping roller in the set wrapping position and the access
panel door closed). After the bale is wrapped with the selected number of film layers,
two (2) cut
& hold units grip and cut the film. The wrapping cycle is completed and the
bale is ready for discharging.
If ‘Auto tip’ is selected, the wrapped bale is discharged when netting of the next bale
starts.
Dispenser position error symbol
l
NOTE: Bale will not transfer if dispenser ring is in wrong position
The bale will not transfer from the baler chamber if the dispenser ring is
in the wrong position. This is a safety feature and is normal. In this case
an audible alarm will sound and the “Dispenser position” error symbol will
be displayed in the control box display. The forward and reverse soft key
indicators will become active on the control box. Press the appropriate
button in order to correct and once corrected the bale will transfer and
the wrapping cycle will begin.
CAUTION: Do not tip off bales while moving
The machine should not be moving when the bale is tipped off, as this
greatly increases the risk of plastic film damage.
