McHale
Fusion Vario
Baler & Wrapper
51
Once set, the number of net layers is automatically calculated, regardless of bale
diameter or size.
In general, automatic mode is used. Manual mode is not normally selected unless there
is a machine fault preventing automatic mode from working.
In manual mode, the net is fed, by pushing and holding Button L3 until the bale catches
the net. The operator then cuts the net by pushing and holding button L4 until the netter
knife trips, otherwise net will continue to feed until Button L4 is activated.
To repeat the netting cycle in manual mode the chamber closed button (R2) must be
pressed to return the net feed arm to the baling position, then button L3 can then be
pressed to repeat the netting cycle.
NOTE: Hay or straw with a high % dry matter needs more net
When the control box is set to ‘Bale only’, for hay or straw being baled
with high percentage dry matter, more net must be applied. Dry
conditions and very high densities require up to twice as many layers to
ensure a good bale shape.
