Matsusada DOEF Series, Инструкция по эксплуатации

Страница: 82 / 124

5 Sequence Function
74
DOEF series
Matsusada Precision
3. End setting
Select
“End Setting”
on the program edit screen
using the downward
“▼” or upward “▲” movement
switch. Set your desired behavior by turning the DIAL

OFF: The output is turned off.

HOLD: The output keeps the current state.

GOTO Prog X:
“OFF”, “HOLD”, or executes the program specified with the number “X”
after the current program was terminated.
When it is a linked program, set it to
”GOTO”. Pressing the ENTER switch moves the selecting
item to the program number. Set your desired program number by turning the DIAL.
In order to return to the
“GOTO”, press the ENTER switch again.
If you want to cancel the modification, press the CANCEL switch.
Fig. Setting of linking program Fig. Setting of linking program number
.
4. Setting the number of programs
Set the number of programs in CV or CC mode. The setting range is 1 to 64.
When the value is modified, all step data will be initialized once.
Select
“Change Prog Num”
on the program edit screen
using the downward
“▼” or upward “▲”
movement switch. Set your desired value by turning the DIAL
After setting, pressing the ENTER switch initializes all sequence data and the number of
programs is changed.
For the initialization, it takes approx. five seconds. Do not turn off the unit during this period.
Do not turn off the unit while the message appears.
Doing so, the data will not be correctly stored in memory and it may lead to malfunction.
Press Enter