Matsusada DOEF Series, Инструкция по эксплуатации

Страница: 79 / 124

5 Sequence Function
71
DOEF series
Matsusada Precision
5-4-8 Edit, Save, and Cancel of Program Data
What is a sequence operation is to execute a program that is a collection of steps. The settings that
determine the behavior of the program are called
“program parameters”. There are also settings for
the steps in the program, which are called
“step parameters”.
By setting and saving these parameters, which is called
“program data”, the behavior of the output
will be determined.
The following describes how to shift to the edit screen for the parameters and how to save them.
1. Shifting to the edit screen
In the state of no sequence programs run, select
“Prog Edu” by pressing the downward
movement switch
“▼”. Next, press the ENTER switch to shift to the program edit screen.
When the following screen appears, it means that the program parameters can be edited.
Fig. Sequence stop Fig. Program edit screen
2. Canceling sequence data edit
In order to cancel the sequence data edit and restore the settings before editing, press the
CANCEL switch while editing.
The screen will shift to the sequence stop.
Fig. Program edit screen Fig. Sequence stop
Select
“Prog Edit” and
then press ENTER.
Select
“Prog Edit” and
then press CANCEL.