Maschio ATTILA 250, Использование и обслуживание

Страница: 30 / 114

USE AND MAINTENANCE
ENGLISH
30
cod. F07011124
Life-span of the
equipment
Description
Example and mentions
Transport
Provides for the transfer of the equipment from one place
to another by means of a suitable vehicle
e.g.: use of vehicle on road, rails,
etc.
Moving
Provides for the transfer of the equipment from and into
the transporting vehicle for movements not including
road transport e.g.: use of bridge cranes or special
cranes, forklift trucks, etc.
Fitting
Provides for all the assembling operations that
preliminarily prepare the equipment for set up e.g.: mechanical assemblies,
auxiliary circuits, etc.
Adjust, checking
Provides for the adjustment, setting up and calibration of
all those devices that need to be adapted to the operating
conditions normally provided for and which cannot be
securely fixed during assembling operations
e.g.: adjustment of mechanical
parts, relative alignments, etc.
Use
Use for which the equipment is destined in conformity with
the instructions provided by the manufacturer or
considered usual on the basis of its design, construction
and function
Control
Consists of the checking of the equipment's functions
e.g.: the verification of the correct
functioning of the safety devices,
etc.
Oiling
Provides for the lubrication or greasing of the mobile
parts such as bearing, slides, shafts etc.
Incorect use Use resulting from involuntary negligence and not from a
deliberate intention to use the equipment improperly
e.g.: the use of the equipment
without complying with the
provisions of the manual, the
operators fail to use the DPI, etc.
Maintenance Consists of the periodical checking of the equipment that
are subject to wear or that may require replacing
e.g.: anchor, bolts, cushions/pads-
Clining Consists of the removal of dust and cultivation residues
that could jeopardise the performance and use of the
equipment, as well as the health/safety of the operator
e.g.: removal of earth from the hook-
up points of the anchors and from
the rear rollers
Shut-down Provides for the disassembling of the equipment from the
tractor after work has been completed
Remove
Consists of the complete or partial disassembling of the
equipment, so as to allow possible recycling or segregated
waste collection of the components according to the
provisions laid down by the laws currently in force
Demolition
Consists of the definitive removal of all the parts of the
equipment resulting from the dismantling operation
Disposal Operation that consists of the dismantling of products/
substances contained in the equipment
These parts shall be disposed of,
scrupulously following the provisions
laid down in the legislation in force
Glasses
Mask
DPI CONTINGENCIES
Phase
Overalls
Shoes
Gloves
Transportation
Movement
Installation and setting in
Alignment, adjustment,
dragging (hauling)
Custom use
Control
Lubrication
Maintenance
Cleaning
Shut down
Demounting
Demolition
Disposal
Explanations:
DPI ENVISAGED
DPI IN USE OR FOR USE IN CASE OF NEED
2.1 SUMMARY OF PERSONAL PROTECTION EQUIPMENT
(PPE) TO BE USED DURING ALL OF THE MACHINE’S
OPERATING PHASES
The following table summarises the PPEs (Personal Protection
Equipment) to be used during the various operating phases of the
machine (for each phase the use and/or placing at the worker’s
disposal of the PPEs is mandatory).
The PPEs used must be CE marked and respond to EEC Directive
89/686, transposed in Italian low with Legislative Decree D. Lgs.
475/92 and subsequent revisions.
Responsibility for identifying and selecting the
type
and
category
of PPE.
The following table lists the machine life phases.