Manitou MLT 845 120 LSU 3-E3 Series, Руководство оператора

Страница: 115 / 128

4-4 4-4
INTRODUCTION INTRODUCTION
- Yo - Yo ur lift truck ur lift truck must be used with interchangeable must be used with interchangeable equipment. These items are called: ATTACHMENTS. equipment. These items are called: ATTACHMENTS.
- - A wide range of attachments A wide range of attachments , specially designed and p , specially designed and p er er fectly suitable for y fectly suitable for y our lift truck is available and guaranteed by our lift truck is available and guaranteed by
MANITOU. MANITOU.
- - The attachments are d The attachments are d elivered with a load chart concerning your lift truck. The oper elivered with a load chart concerning your lift truck. The oper ator’s manual and ator’s manual and the load chart should be the load chart should be
kept in the places provided in the lift truck. For standard attachments, their use is governed by the instructions contained on this kept in the places provided in the lift truck. For standard attachments, their use is governed by the instructions contained on this
notice. notice.
- - Some particular uses require the adaptation of the attachment which is n Some particular uses require the adaptation of the attachment which is n ot provided in the price-listed options. Optional s ot provided in the price-listed options. Optional s olutions olutions
exist, consult your dealer. exist, consult your dealer.
All attachments with a suspended load (winch, crane jib, crane jib with winch, hook, etc.) MUST be used with a lift truck equipped with a hydraulic All attachments with a suspended load (winch, crane jib, crane jib with winch, hook, etc.) MUST be used with a lift truck equipped with a hydraulic
movement cut-out device. In this case, the movement cut-out must be switched on and the movement cut-out device. In this case, the movement cut-out must be switched on and the transverse attitude perfectly horizontal. transverse attitude perfectly horizontal.
Only attachments approved by MANITOU are Only attachments approved by MANITOU are to be used on to be used on our lift trucks (see: 4 our lift trucks (see: 4 - ADAPTABLE A - ADAPTABLE A TT TT ACHMENTS IN OPTION ON ACHMENTS IN OPTION ON THE RANGE: TECHNICAL THE RANGE: TECHNICAL
SPECIFICA SPECIFICA TIONS OF TIONS OF ATT ATT ACHMENTS). The manufacturer’s liability will ACHMENTS). The manufacturer’s liability will be denied in be denied in case of modification or case of modification or of attachment adaptation carried out of attachment adaptation carried out without without
his knowing it. his knowing it.
Depending on their size, certain attachments may, when the jib is lowered and retracted, come into contact with the front tyres and cause damage Depending on their size, certain attachments may, when the jib is lowered and retracted, come into contact with the front tyres and cause damage
to them, if reverse tilt is activated in the forward tilt direction. TO REMOVE THIS RISK, EXTEND THE TELESCOPE TO A SUFFICIENT EXTENT FOR THE to them, if reverse tilt is activated in the forward tilt direction. TO REMOVE THIS RISK, EXTEND THE TELESCOPE TO A SUFFICIENT EXTENT FOR THE
PARTICULAR LIFT TRUCK AND ATTACHMENT SO THAT THIS CONTACT IS NOT POSSIBLE. PARTICULAR LIFT TRUCK AND ATTACHMENT SO THAT THIS CONTACT IS NOT POSSIBLE.
Maximum loads are defined by the Maximum loads are defined by the capacity of a lift capacity of a lift truck taking account of the attachment’s mass and centre of gravity. In the event of truck taking account of the attachment’s mass and centre of gravity. In the event of the attachment the attachment
having less capacity than the lift truck, never having less capacity than the lift truck, never exceed this limit. exceed this limit.
https://www.forkliftpdfmanuals.com/