Manitou MLT 845 120 LSU 3-E3 Series, Руководство оператора

Страница: 85 / 128

3-10 3-10
A5 A5
1 1
2 2
A6 A6
2 2
1 1
A4 A4
1 1
2 2
3 3
A4 - FUEL PRE-FILTER A4 - FUEL PRE-FILTER
CHECK CHECK
- Open the I.C. engine bonnet. - Open the I.C. engine bonnet.
- Check for the presence of water in the pre-filter bowl 1 (fig. A4) and empty it out if necessary. - Check for the presence of water in the pre-filter bowl 1 (fig. A4) and empty it out if necessary.
- - Place a receptacle under the drain plug 2 (fig. A4) and loosen Place a receptacle under the drain plug 2 (fig. A4) and loosen it in two to three thread it in two to three thread
turns. turns.
- Allow the diesel fuel to flow out until it is free from impurities and water. - Allow the diesel fuel to flow out until it is free from impurities and water.
- Tighten the drain plug. - Tighten the drain plug.
- - Pressurise the circuit with Pressurise the circuit with the hand pump the hand pump 3 (fig A4) 3 (fig A4)
A5 - CYCLONIC PREFILTER A5 - CYCLONIC PREFILTER
CLEAN CLEAN
The cleaning interval is given as a guide, however the pre-filter must be emptied as soon The cleaning interval is given as a guide, however the pre-filter must be emptied as soon
as impurities reach the MAXI level on the tank. as impurities reach the MAXI level on the tank.
- Loosen nut 1 (fig. A5), r - Loosen nut 1 (fig. A5), r emove cover 2 (fig. A5) and empty emove cover 2 (fig. A5) and empty the tank. the tank.
- Clean the pre-filter unit with a clean dry cloth and reassemble the unit. - Clean the pre-filter unit with a clean dry cloth and reassemble the unit.
When cleaning, take care not to let i When cleaning, take care not to let i mpurities into the dry air mpurities into the dry air filter filter . .
A6 - GEAR BOX OIL LEVEL A6 - GEAR BOX OIL LEVEL
CHECK CHECK
Park the lift truck on level gr Park the lift truck on level gr ound with the jib raised, the I.C. engine cold and stopped. Carr ound with the jib raised, the I.C. engine cold and stopped. Carr y y
out the control within 5 out the control within 5 minutes of the I.C. engine being stopped. minutes of the I.C. engine being stopped.
- Remove the plastic cap 1 - Remove the plastic cap 1 (fig. A6). (fig. A6).
- Remove the dipstick 2 (fig. A6). - Remove the dipstick 2 (fig. A6).
- Wipe the dipstick and check the correct level between the two MIN and MAX. marks. - Wipe the dipstick and check the correct level between the two MIN and MAX. marks.
- If necessary, add oil (see: 3 - MAINTENANCE: E3 - GEAR BOX OIL). - If necessary, add oil (see: 3 - MAINTENANCE: E3 - GEAR BOX OIL).
- - Check visually that there is no leakage Check visually that there is no leakage or seepage of oil in the tran or seepage of oil in the tran smission. smission.
A7 - TYRES PRESSURE AND WHEEL NUTS TORQUE A7 - TYRES PRESSURE AND WHEEL NUTS TORQUE
CHECK CHECK
- Check the condition of the tyres, - Check the condition of the tyres, to detect cuts, protuberances, wear, etc. to detect cuts, protuberances, wear, etc.
- - Check the torque load of the wh Check the torque load of the wh eel nuts. Non compliance with this ins eel nuts. Non compliance with this ins truction can cause damage and rupture to the wheel bolts truction can cause damage and rupture to the wheel bolts
and distortion to the wheels. and distortion to the wheels.
Wheel nuts tightening torque Wheel nuts tightening torque
• • Front Front tyres: tyres: 630 630 N.m N.m ± ± 15% 15%
• • Rear Rear tyres: tyres: 630 630 N.m N.m ± ± 15% 15%
- Check and adjust the tyre pr - Check and adjust the tyre pr essures if necessar essures if necessar y (see: 2 - DESCRIPTION: FRONT AND REAR TYRES). y (see: 2 - DESCRIPTION: FRONT AND REAR TYRES).
Check that the air hose is correctly connected to the tyre valve before inflating and keep all persons at a distance during inflation. Respect the Check that the air hose is correctly connected to the tyre valve before inflating and keep all persons at a distance during inflation. Respect the
recommended tyre pressures given. recommended tyre pressures given.
NOTE: There is an OPTIONAL wheel toolkit. NOTE: There is an OPTIONAL wheel toolkit.
https://www.forkliftpdfmanuals.com/