Manitou MLT 845 120 LSU 3-E3 Series, Руководство оператора

Страница: 22 / 128

1-18 1-18
G - TAKING UP AND LAYING A HIGH LOAD ON STABILIZERS G - TAKING UP AND LAYING A HIGH LOAD ON STABILIZERS
Depending on the model of lift truck Depending on the model of lift truck
Y Y ou must not raise the jib if you have ou must not raise the jib if you have not checked the transverse attitu not checked the transverse attitu de of the lift truck (see: INSTRUCTIONS FOR HANDLING A de of the lift truck (see: INSTRUCTIONS FOR HANDLING A LOAD: D - TRANSVERSE LOAD: D - TRANSVERSE
ATTITUDE OF THE LIFT TRUCK). ATTITUDE OF THE LIFT TRUCK).
REMINDER: REMINDER: Make sure that the Make sure that the following operat following operat ions can be ions can be performed performed with good visibility (see: OPERA with good visibility (see: OPERA TIONS INSTRU TIONS INSTRU CTIONS UNLADEN CTIONS UNLADEN
AND LADEN: D - VISIBILITY). AND LADEN: D - VISIBILITY).
USING THE USING THE STABILIZ STABILIZ ERS ERS
The stabilizers are used to optimise the lift truck’s lifting performances (see: 2 - DESCRIPTION: INSTRUMENTS AND CONTROLS). The stabilizers are used to optimise the lift truck’s lifting performances (see: 2 - DESCRIPTION: INSTRUMENTS AND CONTROLS).
POSITION THE STABILIZERS WITH THE FORKS IN TRANSPORT POSITION THE STABILIZERS WITH THE FORKS IN TRANSPORT POSITION (UNLADEN AND LADEN) POSITION (UNLADEN AND LADEN)
- Set the forks in transport position in front of the elevation. - Set the forks in transport position in front of the elevation.
- Stay far enough away to have - Stay far enough away to have room for the jib to room for the jib to be raised. be raised.
- Put the handbrake on and - Put the handbrake on and put the gearshift lever into neutral. put the gearshift lever into neutral.
- - Set the two stabilizers on the ground and lift the two front wheels of the lift truck (fig. G1), Set the two stabilizers on the ground and lift the two front wheels of the lift truck (fig. G1),
while maintaining while maintaining its transverse stability. its transverse stability.
RAISE THE STABILIZERS WITH THE FORKS IN RAISE THE STABILIZERS WITH THE FORKS IN TRANSPORT POSITION (UNLADEN AND LADEN) TRANSPORT POSITION (UNLADEN AND LADEN)
- Raise both stabilizers fully and at - Raise both stabilizers fully and at the same time. the same time.
SETTING THE STABILIZERS WITH THE JIB UP ( SETTING THE STABILIZERS WITH THE JIB UP ( UNLADEN AND LADEN) UNLADEN AND LADEN)
This operation must be exceptional and performed with great care. This operation must be exceptional and performed with great care.
- Raise the jib and r - Raise the jib and r etract the telescopes completely. etract the telescopes completely.
- - Set the lift truck in position in front Set the lift truck in position in front of the elevation (fig. of the elevation (fig. G2) moving very slowly and G2) moving very slowly and
carefully. carefully.
- Put the handbrake on and - Put the handbrake on and put the gearshift lever into neutral. put the gearshift lever into neutral.
- - Move the stabilizers very slowly and gradually as soon as they Move the stabilizers very slowly and gradually as soon as they are close to the ground or are close to the ground or
in contact with it. in contact with it.
- - Lower the two stabilizers and lift the two Lower the two stabilizers and lift the two front wheels of the lift truck front wheels of the lift truck (fig. G3). During this (fig. G3). During this
operation, transverse attitude must be permanently maintained: the bubble in the level operation, transverse attitude must be permanently maintained: the bubble in the level
must be kept between the two lines. must be kept between the two lines.
SETTING THE STABILIZERS WITH THE JIB UP ( SETTING THE STABILIZERS WITH THE JIB UP ( UNLADEN AND LADEN) UNLADEN AND LADEN)
This operation must be exceptional and performed with great care. This operation must be exceptional and performed with great care.
- Keep the jib up and - Keep the jib up and retract the telescopes completely (fig. G3). retract the telescopes completely (fig. G3).
- - Move the stabilizers very slowly and gradually as soon as they are in contact with Move the stabilizers very slowly and gradually as soon as they are in contact with the the
ground and when they leave the ground. During this operation, the transverse attitude ground and when they leave the ground. During this operation, the transverse attitude
must be permanently maintained: the bubble in the level must be kept between the two must be permanently maintained: the bubble in the level must be kept between the two
lines. lines.
- Raise both stabilizers - Raise both stabilizers completely completely . .
- - Release the parking brake Release the parking brake and reverse the lift truck (1) and reverse the lift truck (1) ver ver y slowly and carefully y slowly and carefully , to , to
release it and lower release it and lower the forks ( the forks ( 2) into transport position (fig. 2) into transport position (fig. G4). G4).
G1 G1
G2 G2
G3 G3
1 1
2 2
G4 G4
https://www.forkliftpdfmanuals.com/