Manitou MLT 845 120 LSU 3-E3 Series, Руководство оператора

Страница: 61 / 128

2-28 2-28
21 - HEATER CONTROL 21 - HEATER CONTROL
A A - - HE HE A A TI TI NG NG F F AN AN CO CO NT NT RO RO L L
This 2-speed control regulates warm or cold air through the heating ventilators. This 2-speed control regulates warm or cold air through the heating ventilators.
In position 0, the fan is off. In position 0, the fan is off.
In position 1, the fan is set In position 1, the fan is set to minimum speed. to minimum speed.
In position 2, the fan is set In position 2, the fan is set to maximum speed. to maximum speed.
B B - - HEA HEA TIN TIN G G TEM TEM PER PER A A TUR TUR E E CO CO NTR NTR OL OL
Allows the temperature inside the cab Allows the temperature inside the cab to be adjusted. to be adjusted.
In position 1, the valve is In position 1, the valve is closed, the fan delivers fresh air. closed, the fan delivers fresh air.
In position 2, the valve is In position 2, the valve is fully open, the fan delivers war fully open, the fan delivers war m air. m air.
The intermediate positions allow the temperature to be adjusted. The intermediate positions allow the temperature to be adjusted.
22 - AIR CONDITIONING CONTROLS (OPTION AIR 22 - AIR CONDITIONING CONTROLS (OPTION AIR CONDITIONING) CONDITIONING)
The air conditioning only comes on when the forklift truck The air conditioning only comes on when the forklift truck has been started up. When using your air has been started up. When using your air
conditioning, you must work with conditioning, you must work with the doors and windows closed. the doors and windows closed.
In winter: So as to ensure correct operation and complete efficiency In winter: So as to ensure correct operation and complete efficiency of the air conditioning unit, start of the air conditioning unit, start
up the compressor once a week, if only up the compressor once a week, if only for a short for a short spell, so as to lubricate the internal seals. spell, so as to lubricate the internal seals.
In cold weather: Warm the I.C. In cold weather: Warm the I.C. engine before switching on the engine before switching on the compressor compressor , so as , so as to allow the to allow the coolant coolant
that has collected in the liquid state at that has collected in the liquid state at the lowest point of the compressor circuit to turn the lowest point of the compressor circuit to turn into gas into gas
under the effect of the heat given under the effect of the heat given off by the off by the I.C. engine, as the compressor is liable to be I.C. engine, as the compressor is liable to be damaged by damaged by
coolant in the liquid state. coolant in the liquid state.
If your air conditioning does not seem to be working properly, have it examined by your dealer (see: 3 If your air conditioning does not seem to be working properly, have it examined by your dealer (see: 3
- MAINTENANCE: F - EVERY 2000 HOURS OF SERVICE). Never try to repair any possible problems by - MAINTENANCE: F - EVERY 2000 HOURS OF SERVICE). Never try to repair any possible problems by
yourself. yourself.
C C - - CO CO ND ND ITI ITI ON ON ED ED AIR AIR TEM TEM PER PER A A TUR TUR E E CO CO NTR NTR OL OL
Allows the temperature inside the cab Allows the temperature inside the cab to be adjusted. to be adjusted.
In position 0, the air-conditioning system is switched off. In position 0, the air-conditioning system is switched off.
In position 1, the air-conditioning system runs on minimum. In position 1, the air-conditioning system runs on minimum.
In position 2, the air-conditioning system runs on maximum. In position 2, the air-conditioning system runs on maximum.
The intermediate positions allow the temperature to be adjusted. The intermediate positions allow the temperature to be adjusted.
NOTE: NOTE: Possible losses o Possible losses o f water under the lift truck are due to condens f water under the lift truck are due to condens ate discharges caused ate discharges caused
by the drying effect of the installation, especially with high outside temperatures by the drying effect of the installation, especially with high outside temperatures
and high relative humidity. and high relative humidity.
For the air conditioning to perform properly, the air intakes must not be blocked by For the air conditioning to perform properly, the air intakes must not be blocked by
frost, snow or leaves. frost, snow or leaves.
When the facility is running, at least one of the cab air grilles must be open so as When the facility is running, at least one of the cab air grilles must be open so as
to avoid any risk of fr to avoid any risk of fr eezing to the evaporator. eezing to the evaporator.
CO CO ND ND ITI ITI ON ON ED ED AIR AIR MO MO DE DE
The controls must be adjusted in the following way: The controls must be adjusted in the following way:
A - At the required position 1 or 2. A - At the required position 1 or 2.
B - At the position 1 B - At the position 1 (heater valve closed). (heater valve closed).
C - At the required temperature. C - At the required temperature.
DEM DEM ISTIN ISTIN G G MOD MOD E E
The controls must be adjusted in the following way: The controls must be adjusted in the following way:
A - At the required position 1 or 2. A - At the required position 1 or 2.
B - At the required temperature. B - At the required temperature.
C - At the required temperature. C - At the required temperature.
A A
0 0
1 1
2 2
B B
1 1 2 2
A A
0 0
1 1
2 2
B B
1 1 2 2
C C
1 1
2 2
https://www.forkliftpdfmanuals.com/