Manitou MLT 845 120 LSU 3-E3 Series, Руководство оператора

Страница: 28 / 128

1-23 1-23
1 24 1 24
MAINTENANCE INSTRUCTIONS OF THE LIFT TRUCK MAINTENANCE INSTRUCTIONS OF THE LIFT TRUCK
GENERAL INSTRUCTIONS GENERAL INSTRUCTIONS
- Ensure the area is sufficiently ventilated before starting the lift truck. - Ensure the area is sufficiently ventilated before starting the lift truck.
- - Wear clothes suitable for Wear clothes suitable for the maintenance of the lift truck, avoid wearing jewellery and loose clothes. Tie and protect your hair the maintenance of the lift truck, avoid wearing jewellery and loose clothes. Tie and protect your hair , ,
if necessary. if necessary.
- Stop the I.C. engine and remove the ignition key, when an intervention is necessary. - Stop the I.C. engine and remove the ignition key, when an intervention is necessary.
- Read the operator’s - Read the operator’s manual carefully. manual carefully.
- Carry out all repairs immediately, even if the repairs concerned are minor. - Carry out all repairs immediately, even if the repairs concerned are minor.
- Repair all leaks immediately, even if the leak - Repair all leaks immediately, even if the leak concerned is minor. concerned is minor.
- - Make sure that the disposal of Make sure that the disposal of process materials and of s process materials and of s pare par pare par ts is carried out in total safety ts is carried out in total safety and in a ecological way and in a ecological way . .
- Be careful of the risk - Be careful of the risk of burning and splashing (exhaust, radiator, I.C. engine, etc.). of burning and splashing (exhaust, radiator, I.C. engine, etc.).
MAINTENANCE MAINTENANCE
- - Perform the periodic service (see: 3 - Perform the periodic service (see: 3 - MAINTENANC MAINTENANC E) to keep your lift truck in good working condition E) to keep your lift truck in good working condition s. Failure to perform the periodic s. Failure to perform the periodic
service may cancel the contractual guarantee. service may cancel the contractual guarantee.
MAINTENANCE LOGBOOK MAINTENANCE LOGBOOK
- - The maintenance operations carried out in accordance with The maintenance operations carried out in accordance with the recommendations given in part: 3 - MAINTENANCE and the other the recommendations given in part: 3 - MAINTENANCE and the other
inspection, servicing or repair operations or modifications performed on the lift truck or its attachments shall be recorded in a inspection, servicing or repair operations or modifications performed on the lift truck or its attachments shall be recorded in a
maintenance logbook. The entr maintenance logbook. The entr y for each operation shall include details of the date of the works, the names of the y for each operation shall include details of the date of the works, the names of the individuals or individuals or
companies having per companies having per formed them, the type of operation and its frequency, if applicable. The par formed them, the type of operation and its frequency, if applicable. The par t numbers of any lift truck i t numbers of any lift truck i tems tems
replaced shall also be indicated. replaced shall also be indicated.
LUBRICANT AND FUEL LEVELS LUBRICANT AND FUEL LEVELS
- Use the recommended lubricants (never use contaminated lubricants). - Use the recommended lubricants (never use contaminated lubricants).
- Do not fill the fuel tank when the I.C. engine is running. - Do not fill the fuel tank when the I.C. engine is running.
- Only fill up the fuel tank in areas specified for this purpose. - Only fill up the fuel tank in areas specified for this purpose.
- Do not fill the fuel tank to the maximum level. - Do not fill the fuel tank to the maximum level.
- - Do not smoke or approach the Do not smoke or approach the lift truck with a flame, when the fuel tank is lift truck with a flame, when the fuel tank is open or is being filled. open or is being filled.
HYDRAULIC HYDRAULIC
- - Any work on the load handling hydrau Any work on the load handling hydrau lic circuit is forbidden except for the o lic circuit is forbidden except for the o perations described in part: 3 - MAINTENANCE. perations described in part: 3 - MAINTENANCE.
- Do not attempt to loosen - Do not attempt to loosen unions, hoses or any hydraulic component with the cir unions, hoses or any hydraulic component with the cir cuit under pressure. cuit under pressure.
BALANCING VAL BALANCING VAL VE: It is VE: It is dangerous to change the setting and remove the dangerous to change the setting and remove the balancing valves or safety valves which balancing valves or safety valves which may be fitted to may be fitted to your lift truck cylinders. your lift truck cylinders.
These operations must only be performed by approved personnel (consult your dealer). These operations must only be performed by approved personnel (consult your dealer).
The HYDRAULIC ACCUMULATORS that may be fitted on your lift truck are pressurized units. Removing these accumulators and their pipework is a The HYDRAULIC ACCUMULATORS that may be fitted on your lift truck are pressurized units. Removing these accumulators and their pipework is a
dangerous operation and must only be performed by approved personnel (consult your dealer). dangerous operation and must only be performed by approved personnel (consult your dealer).
ELECTRICITY ELECTRICITY
- - Do not short-circuit the starter relay to start the IC engine. If the forward/reverse sele Do not short-circuit the starter relay to start the IC engine. If the forward/reverse sele ctor is not in neutral and the parking brake ctor is not in neutral and the parking brake is is
not engaged, the lift truck may suddenly start to not engaged, the lift truck may suddenly start to move. move.
- Do not drop metallic items on the battery. - Do not drop metallic items on the battery.
- Disconnect the battery before working on the electrical circuit. - Disconnect the battery before working on the electrical circuit.
https://www.forkliftpdfmanuals.com/