Manitou MLT 845 120 LSU 3-E3 Series, Руководство оператора

Страница: 91 / 128

3-16 3-16
B6 - HYDRAULIC OIL LEVEL B6 - HYDRAULIC OIL LEVEL
CHECK CHECK
Place the lift truck on level ground with the I.C. engine stopped, and the jib retracted and Place the lift truck on level ground with the I.C. engine stopped, and the jib retracted and
lowered as far as possible. lowered as far as possible.
- Refer to gauge 1 (fig. B6). - Refer to gauge 1 (fig. B6).
- The oil level is correct when it is at the level of the red point. - The oil level is correct when it is at the level of the red point.
- If necessar - If necessar y, add oil (see: 3 - MAINTENANCE: LUBRICANTS AND FUEL). y, add oil (see: 3 - MAINTENANCE: LUBRICANTS AND FUEL).
- Open the access panel for hydraulic oil filling. - Open the access panel for hydraulic oil filling.
- Remove cap 2 (fig. B6). - Remove cap 2 (fig. B6).
- Add oil through filler port 3 (fig. B6). - Add oil through filler port 3 (fig. B6).
Use a clean funnel and clean the Use a clean funnel and clean the underside of the oil drum before filling. underside of the oil drum before filling.
- Put the cap back and close the access panel for hydraulic oil filling. - Put the cap back and close the access panel for hydraulic oil filling.
- Check visually that there is no leakage in the tank and pipes. - Check visually that there is no leakage in the tank and pipes.
Always maintain the oil level at maximum as cooling depends on the oil flowing through the tank. Always maintain the oil level at maximum as cooling depends on the oil flowing through the tank.
B7 - BRAKE OIL LEVEL B7 - BRAKE OIL LEVEL
CHECK CHECK
Place the lift truck on level ground. Place the lift truck on level ground.
- - Loosen screw 1 (fig. B7/ Loosen screw 1 (fig. B7/ 1) and remove the braking oil tank acces 1) and remove the braking oil tank acces s panel 2 (fig. B7/1) s panel 2 (fig. B7/1) . .
- The level is correct when it is at the MAXI level on the tank. - The level is correct when it is at the MAXI level on the tank.
- - If necessary, add oil (see: 3 - M If necessary, add oil (see: 3 - M AINTENANCE: LUBRICANTS AND FUEL) by t AINTENANCE: LUBRICANTS AND FUEL) by t he filler port 3 he filler port 3
(fig. B7/2). (fig. B7/2).
- Check visually that there is no leakage in the tank and pipes. - Check visually that there is no leakage in the tank and pipes.
If the braking oil If the braking oil level is level is abnormally low, consult your dealer abnormally low, consult your dealer . .
B8 - WINDSCREEN WASHER LIQUID LEVEL B8 - WINDSCREEN WASHER LIQUID LEVEL
CHECK CHECK
- Remove the filler cap 1 - Remove the filler cap 1 (fig. B8). (fig. B8).
- Check visually the level. - Check visually the level.
- - If necessary add windscreen washer liquid (see: If necessary add windscreen washer liquid (see: 3 - MAINTENANCE: LUBRIC 3 - MAINTENANCE: LUBRIC ANTS AND ANTS AND
FUEL) by filler port 2 (fig. B8). FUEL) by filler port 2 (fig. B8).
B7/1 B7/1
1 1
1 1
2 2
B7/2 B7/2
3 3
B8 B8
1 1
2 2
B6 B6
1 1
2 2
3 3
https://www.forkliftpdfmanuals.com/