DIAGNOSTIC MANUAL MAN-00201
QUANTO
EMS
SEP 2012/Rev 1
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd.,
will amount to unauthorized use and shall be liable for penalty/prosecution
© 2012 Mahindra & Mahindra Ltd.
`
Ignition OFF
Accelerator pedal
wiring
harness connector (C124)
DISCONNECTED
EMS ECU wiring harness
connector DISCONNECTED
Check the continuity between
pin 6 of accelerator pedal wiring
harness connector and pin 60 of
the EMS ECU wiring harness
connector
Check the continuity between
pin 5 of accelerator pedal
wiring harness connector and
pin 82 of the EMS ECU wiring
harness connector
STEP 4
I
Is the continuity
exists?
Suspect accelerator pedal
sensor 2 internal failure
Replace accelerator pedal with
a new one.
Check and verify for any new
DTC’s
Examine the open circuit of
accelerator pedal sensor 2
signal wire and/or ground wire
Replace the wiring harness
Clear the DTC and verify
NO
YES
P 2128
195